最近無意打開了DOSBOX的配置文件，看了下，試著翻譯了一下，初中英語水平，錯的地方請高手指出，謝謝
dosBox的配置文件是 dosbox.conf
[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
#全屏啟動dosbox
# autolock -- Mouse will automatically lock, if you click on the screen.
#如果你在屏幕上點一下，鼠標將會自動鎖住
# sensitiviy -- Mouse sensitivity.
#鼠標敏感度
# waitonerror -- Wait before closing the console if dosbox has an error.
#如果dosbox錯誤，在關閉控制臺之前等待
fullscreen=true
autolock=true
sensitivity=100
waitonerror=true
[dosbox]
# language -- Select another language file.
#選擇另一種語言
# memsize -- Amount of memory dosbox has in megabytes.
#dosbox內存大小 百萬字節(MB)為單位
language=
memsize=16
[render]
# frameskip -- How many frames dosbox skips before drawing one.
#在繪圖前dosbox跳多少幀
# snapdir -- Directory where screenshots get saved.
#屏幕截圖保存的目錄
# scaler -- Scaler used to enlarge/enhance low resolution modes.
#擴大/提高低分辨率縮放模式
# Supported are none,normal2x,advmame2x
frameskip=0
snapdir=snaps
scaler=normal2x
[cpu]
# cycles -- Amount of instructions dosbox tries to emulate each millsecond.
#dosbox嘗試每豪秒模擬的指令數量
# Setting this higher than your machine can handle is bad!
#設置此項高過于你的CPU處理能力是不行的
cycles=1800
[mixer]
#聲音混合器
# nosound -- Enable silent mode, sound is still emulated though.
#啟動靜音模式，聲音仍然在模擬！
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
#混合器采樣率，設置過高或許會降低聲音的質量
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
#混合器區塊大小，較大的區塊大小也許能解決聲音停頓，但是也會更加滯后
# wavedir -- Directory where saved sound output goes when you use the
# sound record key-combination, check README file.
#當你使用組合鍵錄音時錄音保存的目錄，請閱讀README.txt文件
nosound=false
rate=22050
blocksize=2048
wavedir=waves
[midi]
# mpu401 -- Enable MPU-401 Emulation.
#開啟MPU-401模擬
# device -- Device that will receive the MIDI data from MPU-401.
#所選裝置將會從MPU-401接收MIDI數據
# This can be default,alsa,oss,win32,coreaudio,none.
#可以設置default,alsa,oss,win32,coreaudio,none幾個值
# config -- Special configuration options for the device.
#裝置特別配置選項
mpu401=true
device=default
config=
[sblaster]
# sblaster -- Enable the soundblaster emulation.
#開啟soundblaster模擬
# base,irq,dma -- The IO/IRQ/DMA address of the soundblaster.
#soundblaster的IO/IRQ/DMA地址
# sbrate -- Sample rate of soundblaster emulation.
#soundblaster模擬采樣率
# adlib -- Enable the adlib emulation.
#開啟adlib模擬
# adlibrate -- Sample rate of adlib emulation.
#adlib模擬采樣率
# cms -- Enable the Creative Music System/Gameblaster emulation.
#啟動CMS/Gameblaster 模擬
# Enabling both the adlib and cms might give conflicts!
#同時開啟adlib和cms有可能產生沖突！
# cmsrate -- Sample rate of cms emulation.
#CMS模擬采樣率
sblaster=true
base=220
irq=7
dma=1
sbrate=22050
adlib=true
adlibrate=22050
cms=false
cmsrate=22050
[speaker]
#喇叭
# pcspeaker -- Enable PC-Speaker emulation.
#開啟PC喇叭模擬
# pcrate -- Sample rate of the PC-Speaker sound generation.
#PC喇叭采樣率
# tandy -- Enable Tandy 3-Voice emulation.
#開啟Tandy公司的3-Voice模擬
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
#Tandy公司3-Voice采樣率
# disney -- Enable Disney Sound Source emulation.
#開啟disney(狄斯耐)音源模擬
pcspeaker=true
pcrate=22050
tandy=true
tandyrate=22050
disney=true
[bios]
# Nothing to setup yet!
#無任何設置
[dos]
# xms -- Enable XMS support.啟用XMS支持
# ems -- Enable EMS support.啟用EMS支持
# dpmi -- Enable builtin DPMI host support.
#啟用建立DPMI主機支持
# This might help in getting some games to work, but might crash others.
#這可能對一些游戲運行有利，但是其他一些游戲有可能導致PSP當機。
# So be sure to try both settings.
#試著設定TURE和FALSE來確定吧
xms=true
ems=true
dpmi=true
[modem]
# modem -- Enable virtual modem emulation.
#開啟虛擬調制解調器模擬
# comport -- COM Port modem is connected to.
#modem連接的COM端口
# listenport -- TCP Port the momdem listens on for incoming connections.
#
modem=true
comport=2
listenport=23
[autoexec]
# Lines in this section will be run at startup.
#這一段將會在啟動dosbox時運行(注：DOS游戲存放目錄，可自由更改，比如mount c ms0:/psp/DosGame)
mount c ms0:/psp/DosGame
下面附一個標準的dosbox.conf 文件
# This is the configurationfile for DOSBox 0.72.
# Lines starting with a # are commentlines.
# They are used to (briefly) document the effect of each option.
[sdl]
# fullscreen -- Start dosbox directly in fullscreen.
# fulldouble -- Use double buffering in fullscreen.
# fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768).
# windowresolution -- Scale the window to this size IF the output device supports hardware scaling.
# output -- What to use for output: surface,overlay,opengl,openglnb,ddraw.
# autolock -- Mouse will automatically lock, if you click on the screen.
# sensitiviy -- Mouse sensitivity.
# waitonerror -- Wait before closing the console if dosbox has an error.
# priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest,pause (when not focussed).
# Second entry behind the comma is for when dosbox is not focused/minimized.
# mapperfile -- File used to load/save the key/event mappings from.
# usescancodes -- Avoid usage of symkeys, might not work on all operating systems.
fullscreen=false
fulldouble=false
fullresolution=640x480
windowresolution=originnal
output=surface
autolock=true
sensitivity=100
waitonerror=true
priority=higher,normal
mapperfile=mapper.txt
usescancodes=true
[dosbox]
# language -- Select another language file.
# memsize -- Amount of memory DOSBox has in megabytes.
# machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga.
# captures -- Directory where things like wave,midi,screenshot get captured.
language=
machine=vga
captures=capture
memsize=128
[render]
# frameskip -- How many frames DOSBox skips before drawing one.
# aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down!.
# scaler -- Scaler used to enlarge/enhance low resolution modes.
# Supported are none,normal2x,normal3x,advmame2x,advmame3x,hq2x,hq3x,
# 2xsai,super2xsai,supereagle,advinterp2x,advinterp3x,
# tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x.
# If forced is appended (like scaler=hq2x forced), the scaler will be used
# even if the result might not be desired.
frameskip=0
aspect=true
scaler=advinterp2x
[cpu]
# core -- CPU Core used in emulation: normal,simple,dynamic,auto.
# auto switches from normal to dynamic if appropriate.
# cycles -- Amount of instructions DOSBox tries to emulate each millisecond.
# Setting this value too high results in sound dropouts and lags.
# You can also let DOSBox guess the correct value by setting it to max.
# The default setting (auto) switches to max if appropriate.
# cycleup -- Amount of cycles to increase/decrease with keycombo.
# cycledown Setting it lower than 100 will be a percentage.
core=normal
cycles=6100
cycleup=500
cycledown=20
[mixer]
# nosound -- Enable silent mode, sound is still emulated though.
# rate -- Mixer sample rate, setting any devices higher than this will
# probably lower their sound quality.
# blocksize -- Mixer block size, larger blocks might help sound stuttering
# but sound will also be more lagged.
# prebuffer -- How many milliseconds of data to keep on top of the blocksize.
nosound=false
rate=22050
blocksize=2048
prebuffer=10
[midi]
# mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent.
# device -- Device that will receive the MIDI data from MPU-401.
# This can be default,alsa,oss,win32,coreaudio,none.
# config -- Special configuration options for the device. In Windows put
# the id of the device you want to use. See README for details.
mpu401=intelligent
device=default
config=
[sblaster]
# sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16.
# sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster.
# mixer -- Allow the soundblaster mixer to modify the DOSBox mixer.
# oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3.
# On auto the mode is determined by sblaster type.
# All OPL modes are 'Adlib', except for CMS.
# oplrate -- Sample rate of OPL music emulation.
sbtype=sb16
sbbase=220
irq=7
dma=1
hdma=5
mixer=true
oplmode=auto
oplrate=22050
[gus]
# gus -- Enable the Gravis Ultrasound emulation.
# gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the
# Gravis Ultrasound. (Same IRQ's and DMA's are OK.)
# gusrate -- Sample rate of Ultrasound emulation.
# ultradir -- Path to Ultrasound directory. In this directory
# there should be a MIDI directory that contains
# the patch files for GUS playback. Patch sets used
# with Timidity should work fine.
gus=true
gusrate=22050
gusbase=240
irq1=5
irq2=5
dma1=3
dma2=3
ultradir=C:\ULTRASND
[speaker]
# pcspeaker -- Enable PC-Speaker emulation.
# pcrate -- Sample rate of the PC-Speaker sound generation.
# tandy -- Enable Tandy Sound System emulation (off,on,auto).
# For auto Tandysound emulation is present only if machine is set to tandy.
# tandyrate -- Sample rate of the Tandy 3-Voice generation.
# disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible.
pcspeaker=true
pcrate=22050
tandy=auto
tandyrate=22050
disney=true
[joystick]
# joysticktype -- Type of joystick to emulate: auto (default), none,
# 2axis (supports two joysticks,
# 4axis (supports one joystick, first joystick used),
# 4axis_2 (supports one joystick, second joystick used),
# fcs (Thrustmaster), ch (CH Flightstick).
# none disables joystick emulation.
# auto chooses emulation depending on real joystick(s).
# timed -- enable timed intervals for axis. (false is old style behaviour).
# autofire -- continuously fires as long as you keep the button pressed.
# swap34 -- swap the 3rd and the 4th axis. can be useful for certain joysticks.
# buttonwrap -- enable button wrapping at the number of emulated buttons.
joysticktype=auto
timed=true
autofire=false
swap34=false
buttonwrap=true
[serial]
# serial1-4 -- set type of device connected to com port.
# Can be disabled, dummy, modem, nullmodem, directserial.
# Additional parameters must be in the same line in the form of
# parameter:value. Parameter for all types is irq.
# for directserial: realport (required), rxdelay (optional).
# for modem: listenport (optional).
# for nullmodem: server, rxdelay, txdelay, telnet, usedtr,
# transparent, port, inhsocket (all optional).
# Example: serial1=modem listenport:5000
serial1=dummy
serial2=dummy
serial3=disabled
serial4=disabled
[dos]
# xms -- Enable XMS support.
# ems -- Enable EMS support.
# umb -- Enable UMB support.
# keyboardlayout -- Language code of the keyboard layout (or none).
xms=true
ems=true
umb=true
keyboardlayout=none
[ipx]
# ipx -- Enable ipx over UDP/IP emulation.
ipx=false
[autoexec]
# Lines in this section will be run at startup.
@ECHO OFF
mount c .\鬼馬小英雄
c:
MONK.EXE
exit
本文導航
- 第1頁: 首頁
- 第2頁: 第二個版本的翻譯
喜歡 
頂
難過
囧
圍觀
無聊
